Optical Interface Detector
The simplicity of design and quality of engineering employed in the KAM OID Optical Interface Detector
mean there are no moving parts. Fiber optics within the patented
optical probe respond to the absorption, fluorescence, and refractive
properties of the fluid which is turned into an analog signal, or
"optical signature."
Measurement is fully automatic without
the need for operator intervention or supervision. The output signal
can be sent to the SCADA, PLC’s, or to a Central Control Room for
logging or display on chart recorders or monitors.
Placing a
preview OID sensor upstream and another at the station gives you the
time and intelligence regarding the interface to always make the most
advantageous cut.
The KAM OID sensor can be installed in an
analyzer loop or in the main line, and because it’s easily mounted
through a full-opening ball valve, you can insert or retract the probe
without having to ever drain the pipe.
FEATURES
• User friendly
• Low power
• Explosion proof
• Low maintenance
• Lens cleans in place
APPLICATIONS
• Batching
• Interface
• Production
• Transmix/regrade reduction
• Quality control
SPECIFICATIONS
Media: Refined products
Material: Wetted parts–316 stainless steel
Power: 12–24 VDC 10 Watts max
Output: 4-20 mA
Fluid temperature: -40º to 160ºF (-40º to 70ºC)
Electronics temperature: -40º to 160ºF (-40º to 70ºC)
Pressure ratings: ANSI 150, 300, 600, 900
Mounting: 3/4" and 1" MNPT
2" MNPT Seal Housing
2", 3", or 4" Flanged Seal Housing
EX enclosure: 3" x 6" x 3" (76mm x 152mm x 76mm)
Shaft length: 12" to 60"
Pipe size: 3/4" to 48"
Weight: from 10 lbs. (4.5kg)
|
|
KAM OID with MNPT seal housing
KAM OID with 1" MNPT for analyzer or densitometer loop
|
RELATED DOCUMENTS:
CUSTOMER EXPERIENCES:
Go back to Product Listing
|
